Matched pair (Headlamp defects which don't require an aim check on retest): pre-2018 MOT
This is pre-2018 MOT wording. The defect categories changed on 20 May 2018.
Now called Matched pair.
4 pre-2018 fail items.
| Old wording | Inspection manual | Now |
|---|---|---|
| Matched pair are not the same shape | an obligatory main or dipped beam headlamp intended to be a matched pair are not the same size or shape | Matched pair are not the same shape (major) |
| Matched pair are not the same size | an obligatory main or dipped beam headlamp intended to be a matched pair are not the same size or shape | Matched pair are not the same size (major) |
| Matched pair are not the same colour | an obligatory main or dipped beam headlamp intended to be a matched pair do not emit light of the same colour | Matched pair are not the same colour (major) |
| Matched pair are incorrectly positioned | a missing, insecure or obviously incorrectly positioned obligatory headlamp | Matched pair are incorrectly positioned (major) |
Current names are the closest match by wording and part. The DVSA publishes no official old-to-new table.
Other pre-2018 parts in Lamps, Reflectors and Electrical Equipment
- Battery (2)
- All direction indicators (13)
- Individual lamps (17)
- Side repeaters (16)
- Switch (Flashing type) (4)
- Tell tales (Flashing type) (2)
- Arm (4)
- Switch (Semaphore) (3)
- Tell tales (Semaphore) (2)
- Electrical wiring (10)
- Lamp (5)
- Switch (Hazard warning) (3)
- Tell tale (Hazard warning) (1)
- Headlamp aim (Lamps, Reflectors and Electrical Equipment) (16)
- British american (dip) (4)
- British american (main) (6)
- European (7)
- Pre 1950 (1)
- Headlamp aim not tested (1)
- Dipswitch (Headlamp defects which do require an aim check on retest) (2)
- Headlamp (Headlamp defects which do require an aim check on retest) (17)
- Headlamp cleaning device (Headlamp defects which do require an aim check on retest) (2)
- Headlamp levelling device (Headlamp defects which do require an aim check on retest) (2)
- Main beam 'tell-tale' (Headlamp defects which do require an aim check on retest) (1)
- Matched pair (Headlamp defects which do require an aim check on retest) (4)
- Switch (Headlamp defects which do require an aim check on retest) (3)
- Dipswitch (Headlamp defects which don't require an aim check on retest) (2)
- Headlamp (Headlamp defects which don't require an aim check on retest) (17)
- Headlamp cleaning device (Headlamp defects which don't require an aim check on retest) (2)
- Headlamp levelling device (Headlamp defects which don't require an aim check on retest) (2)
- Main beam 'tell-tale' (Headlamp defects which don't require an aim check on retest) (1)
- Switch (Headlamp defects which don't require an aim check on retest) (3)
- Horn (12)
- All position lamps (8)
- Front lamps (15)
- Rear lamps (16)
- Switch (Position lamps) (5)
- Fog lamp (16)
- Switch (Rear fog lamp) (4)
- Tell tale (Rear fog lamp) (2)
- Rear reflectors (9)
- Registration plate lamp (8)
- Stop lamp (14)
- Trailer electrical socket (4)
Dabers ANPR shows the full MOT history, defects included, for the car in any photo. How it works
Add to ChromeContains public sector information from the DVSA licensed under the Open Government Licence v3.0.