British american (dip): pre-2018 MOT
This is pre-2018 MOT wording. The defect categories changed on 20 May 2018.
No direct match in the current MOT scheme.
4 pre-2018 fail items.
| Old wording | Inspection manual | Now |
|---|---|---|
| British american (dip) too high (hotspot upper edge above the horizontal 0% line) | the upper edge of the hotspot is above the horizontal 0% line | No direct match |
| British american (dip) too low | the upper edge of the hotspot is below the horizontal 2.75% line | No direct match |
| British american (dip) too far to the right | the right hand of the 'hotspot' is to the right of the vertical 0% line or to the left of the vertical 2% line | No direct match |
| British american (dip) too far to the left | the right hand of the 'hotspot' is to the right of the vertical 0% line or to the left of the vertical 2% line | No direct match |
Current names are the closest match by wording and part. The DVSA publishes no official old-to-new table.
Other pre-2018 parts in Lamps, Reflectors and Electrical Equipment
- Battery (2)
- All direction indicators (13)
- Individual lamps (17)
- Side repeaters (16)
- Switch (Flashing type) (4)
- Tell tales (Flashing type) (2)
- Arm (4)
- Switch (Semaphore) (3)
- Tell tales (Semaphore) (2)
- Electrical wiring (10)
- Lamp (5)
- Switch (Hazard warning) (3)
- Tell tale (Hazard warning) (1)
- Headlamp aim (Lamps, Reflectors and Electrical Equipment) (16)
- British american (main) (6)
- European (7)
- Pre 1950 (1)
- Headlamp aim not tested (1)
- Dipswitch (Headlamp defects which do require an aim check on retest) (2)
- Headlamp (Headlamp defects which do require an aim check on retest) (17)
- Headlamp cleaning device (Headlamp defects which do require an aim check on retest) (2)
- Headlamp levelling device (Headlamp defects which do require an aim check on retest) (2)
- Main beam 'tell-tale' (Headlamp defects which do require an aim check on retest) (1)
- Matched pair (Headlamp defects which do require an aim check on retest) (4)
- Switch (Headlamp defects which do require an aim check on retest) (3)
- Dipswitch (Headlamp defects which don't require an aim check on retest) (2)
- Headlamp (Headlamp defects which don't require an aim check on retest) (17)
- Headlamp cleaning device (Headlamp defects which don't require an aim check on retest) (2)
- Headlamp levelling device (Headlamp defects which don't require an aim check on retest) (2)
- Main beam 'tell-tale' (Headlamp defects which don't require an aim check on retest) (1)
- Matched pair (Headlamp defects which don't require an aim check on retest) (4)
- Switch (Headlamp defects which don't require an aim check on retest) (3)
- Horn (12)
- All position lamps (8)
- Front lamps (15)
- Rear lamps (16)
- Switch (Position lamps) (5)
- Fog lamp (16)
- Switch (Rear fog lamp) (4)
- Tell tale (Rear fog lamp) (2)
- Rear reflectors (9)
- Registration plate lamp (8)
- Stop lamp (14)
- Trailer electrical socket (4)
Dabers ANPR shows the full MOT history, defects included, for the car in any photo. How it works
Add to ChromeContains public sector information from the DVSA licensed under the Open Government Licence v3.0.