Subframe mounting: pre-2018 MOT
This is pre-2018 MOT wording. The defect categories changed on 20 May 2018.
No direct match in the current MOT scheme.
5 pre-2018 fail items.
| Old wording | Inspection manual | Now |
|---|---|---|
| Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength | Deliberate modification which significantly reduces the original strength, excessive corrosion, severe distortion, a fracture or an inadequate repair of a load bearing member or its supporting structure or supporting panelling within 30cm of any sub- | No direct match |
| Subframe mounting prescribed area is excessively corroded | Deliberate modification which significantly reduces the original strength, excessive corrosion, severe distortion, a fracture or an inadequate repair of a load bearing member or its supporting structure or supporting panelling within 30cm of any sub- | No direct match |
| Subframe mounting prescribed area is severely distorted | Deliberate modification which significantly reduces the original strength, excessive corrosion, severe distortion, a fracture or an inadequate repair of a load bearing member or its supporting structure or supporting panelling within 30cm of any sub- | No direct match |
| Subframe mounting prescribed area is fractured | Deliberate modification which significantly reduces the original strength, excessive corrosion, severe distortion, a fracture or an inadequate repair of a load bearing member or its supporting structure or supporting panelling within 30cm of any sub- | No direct match |
| Subframe mounting prescribed area is inadequately repaired | Deliberate modification which significantly reduces the original strength, excessive corrosion, severe distortion, a fracture or an inadequate repair of a load bearing member or its supporting structure or supporting panelling within 30cm of any sub- | No direct match |
Current names are the closest match by wording and part. The DVSA publishes no official old-to-new table.
Other pre-2018 parts in Suspension
- Accumulator (Air suspension) (9)
- Bellows (Air suspension) (3)
- Levelling valve (Air suspension) (4)
- Operation (Air suspension) (1)
- Other components (Air suspension) (1)
- Pipes (Air suspension) (9)
- Suspension unit (Air suspension) (9)
- Attachment (Anti-roll bars) (15)
- Condition (Anti-roll bars) (12)
- Linkage condition (13)
- Linkage pins/bushes/ball joints (12)
- Pins/bushes/ball joints (Anti-roll bars) (16)
- Presence (1)
- Axle beam (5)
- Clearance (2)
- King pins (3)
- Stub axle (5)
- Swivel joints/housing (6)
- Attachment (Bonded suspension) (7)
- Condition (Bonded suspension) (5)
- Condition (Coil springs) (10)
- Location (6)
- Constant velocity joints (Drive shafts (old)) (5)
- Couplings (Drive shafts (old)) (14)
- Any drive shaft which is part of the suspension (3)
- Front drive shaft (2)
- Drive shafts (Any drive shaft which is part of the suspension) (8)
- Universal joint (Suspension) (5)
- Constant velocity joints (Drive shafts) (8)
- Couplings (Drive shafts) (9)
- Drive shafts (Front drive shafts) (3)
- Accumulator (Fluid suspension) (9)
- Bellows (Fluid suspension) (3)
- Levelling valve (Fluid suspension) (4)
- Operation (Fluid suspension) (1)
- Other components (Fluid suspension) (1)
- Pipes (Fluid suspension) (9)
- Suspension unit (Fluid suspension) (9)
- Front suspension joints (23)
- Front suspension retaining and locking devices (4)
- Accumulator (Gas suspension) (9)
- Bellows (Gas suspension) (3)
- Levelling valve (Gas suspension) (4)
- Operation (Gas suspension) (1)
- Other components (Gas suspension) (1)
- Pipes (Gas suspension) (9)
- Suspension unit (Gas suspension) (9)
- General condition (3)
- Anchor bracket (10)
- Condition (Leaf springs) (11)
- Anchor (9)
- Other pins and bushes (3)
- Shackle (9)
- Securing bolts (4)
- Shackle bracket (10)
- Spring eye (4)
- Spring saddle (2)
- Spring slippers (4)
- Condition (Macpherson strut) (18)
- Attachment (Panhard rods) (15)
- Condition (Panhard rods) (13)
- Pins/bushes/ball joints (Panhard rods) (16)
- Component mounting (5)
- Spring mounting (5)
- Attachment (Radius arms) (15)
- Condition (Radius arms) (13)
- Pins/bushes/ball joints (Radius arms) (16)
- Condition (Shock absorbers) (9)
- Fitment (Suspension) (2)
- Attachment (Sub-frames) (15)
- Condition (Sub-frames) (13)
- Pins/bushes/ball joints (Sub-frames) (16)
- Attachment (Suspension arms) (15)
- Condition (Suspension arms) (13)
- Pins/bushes/ball joints (Suspension arms) (17)
- Attachment (Tie bars/rods) (15)
- Condition (Tie bars/rods) (13)
- Pins/bushes/ball joints (Tie bars/rods) (16)
- Attachment (Torque/reaction arms) (15)
- Condition (Torque/reaction arms) (13)
- Pins/bushes/ball joints (Torque/reaction arms) (16)
- Attachment (Torsion bars) (10)
- Condition (Torsion bars) (8)
- Attachment (Trailing arms) (15)
- Condition (Trailing arms) (13)
- Pins/bushes/ball joints (Trailing arms) (16)
- Front (2)
- Rear (2)
Dabers ANPR shows the full MOT history, defects included, for the car in any photo. How it works
Add to ChromeContains public sector information from the DVSA licensed under the Open Government Licence v3.0.